Q235 Q345 Stainless Steel Coils 302 hr s335j2 n hot rolled steel plate manufacturer from Turkey Mittel Steel

Q235 Q345 Stainless Steel Coils 302 hr s335j2 n hot rolled steel plate


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Q235 Q345 Stainless Steel Coils , 302 hr s335j2 n hot rolled steel plate

Specifications

Item	Stainless Steel Coils
Standard	ASTM A240,GB/T3280-2007,JIS4304-2005,ASTM A167,EN10088-2-2005,etc
Material	310S,310,309,309S,316,316L,316Ti,317,317L,321,321H,347,347H, 304,304L,301,302,201,202,405,409L,410,410S,420,430,439,etc
Thickness	Cold Roll: 0.02mm -3.0mm ;Hot Roll: 4.0-20mm
Width	Cold Roll: 3-1500mm ;Hot Roll: 1000-2000mm or as request
Surface	2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
Hardness	1/2H, 3/4H, H, FH,EH,soft/annealed
Temper	Hot Rolled/Cold Rolled
Inspection	Factory's available report can be offered like REACH,MSDS,Rosh and so on.
Inspection	Third Party inspection service can be offered like ISO,SGS,BV and so on.
Package	Standard export seaworthy, plastic film+ water proof paper + wooden pallet or as customers' requirements
Application	1.Automotive: Automotive trim and molding/Difficult-to-form exhaust-system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-system components, catalytic converter shells, clamps 2.Construction: Gutters and downspouts, roofing, siding 3.Kitchenware: Cooking utensils, dishwashers, ovens, range hoods, refrigerators, skewers 4.Chemical processing: Oil refinery equipment, oil burner and heater parts 5.Appliances: Hot water tanks, residential furnaces 6.Power generation: Heat Exchanger tubing 7.Farming:Dry fertilizer spreaders/Farm animal pens
Export	Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA,Brazil, Thailand,Iraq,Russia,Holland,Turkey,Kuwait,Korea,Iran,India,Egypt,Oman,
Export	Malaysia,Peru,Vietnam,Mexico,etc.
Delivery	1. In bulk (based on MOQ)
	2.By-FCL Container
	20 Ft container 25 MT( Length max 5.8m)
	40 Ft container 26 MT( Length max 11.8m)
	3.By-LCL Container Weight Limited 7 MT,Length Limited 5.8 meter.
	4.By Express By air & TNT & DHL & FedEx etc.
Features	1.Surface appearance and performance diversification 2.Good inoxidability and high strength 3.High temperature oxidation resistance, can resistance of fire 4.Cold processing, viz easy to plastic processing 5.Because no use of surface treatment, so easy to maintain 6.Purity,high degree of smooth 7.Good weldability
Maintenance	1. Regular cleaning and maintenance 2. Pay attention to prevent the occurrence of the phenomenon of surface scratches 3. Use soap, weak detergent or warm water to remove surface dust, dirt 4. In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene) 5. Use neutral detergent or ammonia solution in addition to surface oil 6. With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.

Typical chemical composition for 304/304L stainless steel
%	304	304L
C	0-0.08	0-0.035
Mn	0-2.0	0-2.0
Si	0-1	0-1
P	0-0.04	0-0.04
S	0-0.03	0-0.03
Cr	18.0-20.0	18.0-20.0
Ni	8.0-11.0	8.0-11.0
Fe	Balance	Balance

Typical chemical composition for 304/304L stainless steel
Grade	304	304L
Tensile Strength (Mpa)	≥515	≥485
Yield strength (Mpa)	≥205	≥170
Hv	≤200	≤200
Elongation (%)	40 Min	40 Min

Typical physical properties for 304 stainless steel
Property	Value
Density	8.00 g/cm3
Melting Point	1450°C
Modulus of Elasticity	193 GPa
Electrical Resistivity	0.072x10-6 Ù.m
Thermal Conductivity	16.2 W/m.K
Thermal Expansion	17.2x10-6 /K

Detailed Images

Surface Finish	Definition	Application
NO.1	Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria	Chemical tank, pipe, inner and external ornaments for building, electrical appliances and kitchen utensils etc.
2B	The surface brightness and flatness of 2B is better than 2D. Then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity .	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3	Kitchen utensils, Building construction, Medical equipment.
HL	Polished with abrasive belt of grit #150 #320 on the NO.4 finish and has continuous streaks	Building Construction, buildings ornaments elevators, door of building, frontal plate.
NO.8(8K)	The product have excellent brightness and prefer reflexivity can be the mirror.	Refletor, Mirror, Interior- Exterior decoration for building.